the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

S10 > installed alarm dome light no work


Post ReplyPost New Topic
< Prev Topic Next Topic >
lodime 
Member - Posts: 4
Member spacespace
Joined: November 06, 2004
Location: Nauru
Posted: November 07, 2004 at 12:00 AM / IP Logged  
Today my friend and I installed a CrimeStopper alarm & power locks ( CS-2000 Series III ). We got everything to work just great, but now my dome light doesn't work. When there is no key in the ignition even the little lights on the mirror dont turn on when i push button. When i put the key in the lights on the mirror do work when i push button. When i slide the dome light all the way up, the dome light and mirror lights work.
So like when the door is open, the dome light dont come on......
The only wires we spliced that have even anything to do with it is the brown wire for parking lights, black ground wire thats on that brighter and less brigter slider thing and a white wire on a light bulb (door trigger negative). Acoording to the vihicle info page im supposed to connect "
Door TriggerPurple (-) Light Switch Harness 
"
 
but there are 2 purples... so i just figured i can do the white one on the bulb on the bottom since they turn on anyways...
any ideas??? Thanks
daniel2002p 
Silver - Posts: 524
Silver spacespace
Joined: October 10, 2003
Location: United States
Posted: November 07, 2004 at 10:02 AM / IP Logged  
try removing the door trigger wire from where you tapped into it, and see if it goes back to normal.  If it does then relay isolate the door trigger wire.
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
lodime 
Member - Posts: 4
Member spacespace
Joined: November 06, 2004
Location: Nauru
Posted: November 07, 2004 at 5:47 PM / IP Logged  
alarm is unplugged now...and i removed the trigger wire...it still doesnt work. Why doesn't work????
lodime 
Member - Posts: 4
Member spacespace
Joined: November 06, 2004
Location: Nauru
Posted: November 08, 2004 at 11:58 AM / IP Logged  

uh i fixed it...i forgot to plug in this thing lol

now if i can stop the beeping wen i push door open...and maybe so my dash lights dont flash humm


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer