Valet/Program button not working

Home / the12volt's Install Bay / Car Security and Convenience / Valet/Program button not working (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

eiknujrac

Member - Posts: 49

Joined: October 30, 2004

Posted: November 09, 2004 at 1:51 PM / IP Logged

I have a Crimestopper CS2016FM Partially Installed on a 1991 Mercedes 300E. I have not hooked up the ignition kill relay or the remote starter simply because I need to take an afternoon off (the ignition wires are a pain to get to). Everything else works fine, except the valet/program button. It won't do anything. It wont program codes, switch to valet mode, or even disarm the alarm. I've checked the switch with a multimeter, and sure enough its fine. I've also checked the pins on the brain, one has 12v, the other ground. Is it not working simply because I do not have everything hooked up?

The reason I ask is, I need to program a 3 second pulse for my door locks. I can hear the vacuum pump kick on, but it does not stay on long enough.

Any help would be appreciated, thanks!

Back to Top

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: November 09, 2004 at 2:04 PM / IP Logged

Usually valet button needs to see an ignition signal to operate. It should work after you connect your ignition wire at the ignition harness.

Back to Top

eiknujrac

Member - Posts: 49

Joined: October 30, 2004

Posted: November 09, 2004 at 2:12 PM / IP Logged

Thanks for the quick reply, was scared i had a faulty brain or something!

Thanks again

-E

Back to Top

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: November 09, 2004 at 2:18 PM / IP Logged

No problem!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet/Program button not working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.