Clifford Matrix RS3.5 - Rem Start Button

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Matrix RS3.5 - Rem Start Button (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lilaztfats81

Member - Posts: 12

Joined: November 11, 2004

Posted: November 11, 2004 at 12:12 PM / IP Logged

On my classic Arrow 3 system all it takes is 1-push button to start the car.

On the Matrix 3.5, how come I need to press it twice?

Is there a way to change this so I only need to press it once?

Thanks

Back to Top

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: November 11, 2004 at 12:25 PM / IP Logged

In the install manual it shows how to reprogram it so you only have to push it once (single pulse activation). You can also reconfigure it so you have to push two buttons at once for it to start so it does not get started accidentally with the single button.

Back to Top

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: November 11, 2004 at 12:26 PM / IP Logged

Otherwise without the manual I do not know how.

Back to Top

lilaztfats81

Member - Posts: 12

Joined: November 11, 2004

Posted: November 11, 2004 at 12:29 PM / IP Logged

I had an Installer do my Truck.

Will this reprogramming need to be done at the shop or a simple do-it-yourself?

Thanks

Back to Top

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: November 11, 2004 at 12:43 PM / IP Logged

If you have the install manual and access to the valet button and can read instructions it should be easy. If not you installer should be able to do it pretty quickly.

Back to Top

lilaztfats81

Member - Posts: 12

Joined: November 11, 2004

Posted: November 11, 2004 at 1:04 PM / IP Logged

I have access to the valet button...

Just dont have the install manual.

Any links to the Matrix 3.5 install manual?

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 11, 2004 at 2:08 PM / IP Logged

the manual wont help you without the valet push switch..if it wasnt installed then get it from them.....you will either need this switch or a bitwriter to reprogram this feature

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

mdj iknj

Member - Posts: 12

Joined: November 06, 2004

Location: United States

Posted: November 11, 2004 at 3:55 PM / IP Logged

By default, if you press the * button twice, it performs remote start (up to 3 tries). Same thing turns the car off (if it was started successfully). If you press the 'arm' and 'disarm' buttons simultaneously, then it performs the remote start but on a timer.

If you go to the DEI site and look up the alarm, you should be able to find the installation/programming guide. That's where I found it when I had to install mine and the guide wasn't at hand.

... and then there was JDM!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Matrix RS3.5 - Rem Start Button

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.