chevy ck 1500 door locks

I ran into a problem hooking my door locks up to my remote start unit.  I got the wire diagram off here.  I found the wires that control the door locks.  I am using relays for the polarity.  I am able to unlock both doors with the remote start unit, but my main problem is locking the doors.  there is a current going through, but it is only around 7.5 volts, and thats tested right off the relay post.  I have no idea how come the current is so weak.  The constants into the relay read 12.2.  anybody know whats up with this?? 

Not sure YEAR of P.U.If you have 12 volts to PIN 87 where did you check from there (PIN#?)?If it is 5 wire Reversal, check PIN 87a and 30, U may have them reversedMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

its a 97.  at the output on the relay i am getting 12, but at the hookup i am getting the lower voltage.  i have it setup just like the unlock, but the unlock works just fine.

I'm taking it U are using 5 wire Reversal.  If so:

U either are on the wrong wire or PINs R reversed.Does your Locks work from the Door Switch

Power Lock	L BLUE	DRIVER KICK
Power Unlock	WHITE	PANEL **

** Without OEM Keyless Entry  -  Reversal Rest At Ground Door Locks  With OEM Keyless -  Positive Pulse Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

yea the locks work from the switch and the factory keyless entry.  THose are the colors i have it matched up to.  I can unlock it but can't lock it.

sounds like a connection problem......make sure you have the wires wired up the right way for the lock wireGood Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt