the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Ford Escape


Post ReplyPost New Topic
< Prev Topic Next Topic >
slicksam 
Copper - Posts: 291
Copper spacespace
Joined: July 12, 2004
Location: Canada
Posted: November 13, 2004 at 10:18 PM / IP Logged  

I installed the starter in a 05 Escape.....what I need is the Driver door LATCH....I have tested all the wires in the driver's kick panel

The reason I need this wire is to send it a pulse if the customer decides to turn off the starter....it will turn off the radio.

thanks in advance

Testing is the key
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: November 14, 2004 at 12:14 AM / IP Logged  
I think it is yellow/black in the driver's kick. You can test the wires going into the door. Shouldn't be hard to find.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: November 14, 2004 at 8:14 AM / IP Logged  
I show Lt.GREEN/ Black in a large loom of wires near the drivers door. or in a gray connector behind the fuse box in the center console.
J Rilla
Owner/Installer
slicksam 
Copper - Posts: 291
Copper spacespace
Joined: July 12, 2004
Location: Canada
Posted: November 14, 2004 at 4:48 PM / IP Logged  

ok....you ever try going in back of the fuse box......there making things a little harder for us guys.

what is trigger positve or negative if it is lt grn/blk of yellow/black?

thanks

slicksam

Testing is the key
slicksam 
Copper - Posts: 291
Copper spacespace
Joined: July 12, 2004
Location: Canada
Posted: November 15, 2004 at 5:12 PM / IP Logged  

never mind. i found it.

answer = ltgrn/black found @dkp and you need a relay to open it

here is the diagram

https://img79.exs.cx/img79/2599/relay.gif

thanks

Testing is the key

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer