1999 Chrysler 300M alarm disarm

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Chrysler 300M alarm disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ddeguzman

Member - Posts: 9

Joined: December 16, 2002

Location: United States

Posted: November 25, 2004 at 2:05 PM / IP Logged

I am installing a remote start and everything is wired up but I cannot find the OEM disarm for the factory alarm. The wire colors are light green and orange but cannot find it on the drivers kick panel. Anyone know where I can find this wire. This is the last wire I have to connect. Thanks.

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: November 25, 2004 at 6:02 PM / IP Logged

lt.GREEN/ orange. there are two locations. One is at the BCM the plug faces the firewall. second is high up in the drivers dash.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Chrysler 300M alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.