Mannix Remote Start Help

Home / the12volt's Install Bay / Car Security and Convenience / Mannix Remote Start Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Jasonb61

Copper - Posts: 81

Joined: December 01, 2004

Location: United States

Posted: December 01, 2004 at 9:29 PM / IP Logged

Hello,

I just purchased a Mannix Security System and I can get eveything to work but I'm not sure how to hook up the remote start. I have a 1992 Dodge Dakota and if someone could help me out, I will do what I can to repay them.

Here is a link for some info on the starter wires:

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1987-93&make=Dodge&model=Dakota&ID=17596&type=Alarm

Please Help,

Thank You,

-Jason

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 01, 2004 at 10:12 PM / IP Logged

All you have to do is splice in the wires from the Mannix into the ignition wires of the Dodge. ie. Ignition wire ( DARK BLUE ) on truck goes to the IGNITION wire from the Mannix. Starter wire from Dodge truck ( YELLOW ) goes to the starter wire from the Mannix, etc, etc, etc...... Make all your connections necessary and use the wiring sheet from the link above to help you. What you need are these wires to make the system work:

Starter
Ignition
Accessory
ground
tach wire
Constant 12 volts

If you get all these wires connected and program the tach, the system will work for you.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Jasonb61

Copper - Posts: 81

Joined: December 01, 2004

Location: United States

Posted: December 04, 2004 at 9:37 PM / IP Logged

In the wiring diagram in the back of the installation book, it shows a lot of relays... does this mean I must purchase additional relays?

linzhou

Member - Posts: 5

Joined: December 11, 2004

Posted: December 11, 2004 at 11:05 AM / IP Logged

Ya, I think we do need to buy extra relays if want some extra features.

I'm installing a mannix ms700 on my 94 civic cx. the alarm seems work ok, but it just won't remote start. I swear all the necessary wires are connected except trunk pin, etc. by the way, I've a manual tranny.

When I tried automatic reservation on remote start, press and hold the * button, the trunk open signal lit up on my transmitter. I tap the trunk input wire to the ground, and then to the +12V, nothing changed. I've no idea what's going on, still checking on it.

linzhou

Member - Posts: 5

Joined: December 11, 2004

Posted: December 11, 2004 at 5:58 PM / IP Logged

anyway I got my mannix worked. but I still can't find the hook up point for trunk pin (mine is hachback). I checked

94 honda civic's alarm information (https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1994&make=Honda&model=Civic&ID=17970&type=Alarm)

but I couldn't find the GREEN/ black wire above the fuse panel blue connector. only one similar is totally green.

Could anyone generously give me a picture of that and point it out? thx in advance.

customcaraudio

Member - Posts: 5

Joined: December 13, 2004

Location: Australia

Posted: December 13, 2004 at 12:20 AM / IP Logged

Hi. in reply to your boot pin just go straight to the negative side of your boot light. Its just a lot less hassle.

Search for other posts by customcaraudio

Jasonb61

Copper - Posts: 81

Joined: December 01, 2004

Location: United States

Posted: December 13, 2004 at 10:55 PM / IP Logged

I wish someone could tell me in exact english how to get my remote start hooked up... because I'm finding that part difficult... anyone who knows exactly what color goes to another exact color?

Thank you,

-Jason

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mannix Remote Start Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.