vats question ?

Home / the12volt's Install Bay / Car Security and Convenience / vats question ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Legrones

Copper - Posts: 75

Joined: April 17, 2003

Location: United States

Posted: December 13, 2004 at 6:02 PM / IP Logged

if i wont to buypass a vats system all i do is cut the two white wires in the yello loom and put the resistor that i need on the brain side of the white wires ?

Dale / Cory

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 13, 2004 at 6:09 PM / IP Logged

use a relay... and insert the resistor with the relay

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: December 15, 2004 at 12:33 AM / IP Logged

Here's a link, hope it helps

Vats Bypass

ASE Certified

Back to Top

albad4u

Member - Posts: 2

Joined: December 24, 2004

Location: United States

Posted: December 24, 2004 at 7:47 PM / IP Logged

there are 2 white wires on the key side of the plug but they are color coded on the other side. its no need to cut both wires just 1 is fine with a relay and correct resistance or u could use a universal alarm bypass learning ordial in either works great

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vats question ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.