the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3 pn door output harness


Post ReplyPost New Topic
< Prev Topic Next Topic >
sufferrar 
Copper - Posts: 190
Copper spacespace
Joined: July 17, 2002
Location: Trinidad and Tobago
Posted: October 17, 2002 at 9:19 AM / IP Logged  

can some one give the what the center wire in the 3 pin door lock harness does(hornet 715t )? what is the polarity , when the signal is output from there and how? i know that it is used for modules like 415m . but i still like to know more about it ...

hornet 715t

Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: October 17, 2002 at 5:59 PM / IP Logged  
The middle is just a constant positive wire; it's used only to power up the relays that are inside the 451M  (the 451M is basically just two prewired relays).
djfearny2 
Silver - Posts: 810
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2002
Location: United States
Posted: October 17, 2002 at 6:13 PM / IP Logged  
yea you dont  need it unless you are using that unit. so you can cut it off make sure you tape if up.
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer