96 Landcruiser tach wire

Home / the12volt's Install Bay / Car Security and Convenience / 96 Landcruiser tach wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

csimon1

Member - Posts: 3

Joined: December 26, 2004

Location: United States

Posted: December 26, 2004 at 12:36 PM / IP Logged

96' landcruiser...

Need to hook up the tach sensor wire because it's cranking on the second start.

my diagram says the tach sensor is a black wire by the ECM. Can't find it. The wires coming out of the igniter are BLK/RED and BLK/WHT.

looking for advice.

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: December 26, 2004 at 3:01 PM / IP Logged

According to directwire these are the locations,

Tachometer black ac igniter or check conn

Notes: Check connector is on the passenger side firewall near wiper motor. Igniter is by brake master cylinder.

ASE Certified

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 Landcruiser tach wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.