programming instructions please!

Home / the12volt's Install Bay / Car Security and Convenience / programming instructions please! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

insane357

Member - Posts: 3

Joined: December 28, 2004

Location: Canada

Posted: December 28, 2004 at 11:51 AM / IP Logged

Hi people

I am new here but looks like a very informative site! I am having a slight problem programming my cs-555 remote to my new cs 2400/2500 silver box(my old one burnt out) so i am looking for the instructions on how to program the remote to my new brain or if someone can quickly describe on how to do it!

thanks greg

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 28, 2004 at 5:01 PM / IP Logged

TRANSMITTER PROGRAMMING

1. Turn Ignition ON, press and hold the program / override button for about 5 seconds until you hear 5 siren chirp and

the parking lights come on solid.

2. Push any transmitter and the unit will flash the lights 2-4 times (2nd transmitter code flashes 2X and third code

flashes 3X'’ etc.).

3. The is a 10 second program window in which all present transmitter codes must be programmed. Any transmitters

not present or learned in step 2 above will be dropped form the unit’s memory.

4. Turn off Ignition.

insane357

Member - Posts: 3

Joined: December 28, 2004

Location: Canada

Posted: December 29, 2004 at 1:39 PM / IP Logged

ok, the only thing I am not sure of, where is the" program/ overide button" is it on the brain , or on the remote(which only has two buttons) one for start (one dot) and one for unlock/lock doors (two dots).

thanks

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 29, 2004 at 5:17 PM / IP Logged

There shoudl be a a button "valet" some were. most times but may or may not be in your case in under the driver dash some were.

insane357

Member - Posts: 3

Joined: December 28, 2004

Location: Canada

Posted: December 30, 2004 at 11:55 AM / IP Logged

ok well there is a toggle type switch , and it has a on/off position!

i got your pm and i emailed you buddy! thanks again!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming instructions please!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.