the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Audiovox Keyless entry ?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Caspar 
Member - Posts: 4
Member spacespace
Joined: December 12, 2004
Location: United States
Posted: December 30, 2004 at 11:29 PM / IP Logged  
Installed a Audiovox Model AA-925 keyless entry on a 95 honda passport, Everything works except the autolock/unlock feature. When programming i set it for auto unlock and auto lock through the actions of the ign switch, but only the unlock is working when i turn switch off? The auto lock when ignition is turned on doesnt, even though it is programed to do so! Could it be the wiring of a relay or something maybe the brain of the unit itself is faulty, any links to this unit or any help would be appreciated. THANKS  Audiovox Keyless entry ? -- posted image.
secureauto 
Copper - Posts: 196
Copper spacespace
Joined: January 02, 2003
Location: California, United States
Posted: December 30, 2004 at 11:32 PM / IP Logged  
Make sure you got the right door and/or trunk trigger, if the alarm senses either of these open it will not lock doors.
ASE Certified
Caspar 
Member - Posts: 4
Member spacespace
Joined: December 12, 2004
Location: United States
Posted: December 30, 2004 at 11:45 PM / IP Logged  
Not quite sure what you mean (right door and/or trunk trigger)? When i press lock on remote doors lock pk lights & horn flash/chirp once when i press unlock lights/horn chirp twice dome light comes on for 30 sec. When programmed for autolock it only unlocks when turn ign off but no lock when ign is switched to on. The vehicle has no push buttons or anything for door locks, all doors locked when drv door lock was locked then all unlocked when drv door was unlocked. Put actuator on drv door wired to 2 relays 1 for lock 1 for unlock. Maybe brain is dead for the system????? THANKS
secureauto 
Copper - Posts: 196
Copper spacespace
Joined: January 02, 2003
Location: California, United States
Posted: December 30, 2004 at 11:52 PM / IP Logged  
What I meant was, do you have the correct door trigger or trunk trigger? But from the sounds of it you do. Have you tested the doorlock output with a meter, while the key is in the on (ignition) position? Don't forget to close doorpin or disconnect door trigger.
ASE Certified

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer