the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start on 98 S-10 stopped working


Post ReplyPost New Topic
< Prev Topic Next Topic >
Yacht2cool 
Member - Posts: 13
Member spacespace
Joined: October 08, 2002
Location: United States
Posted: January 04, 2005 at 5:38 PM / IP Logged  
Ok so hear's the deal. I put my 560xv in about a year ago and it was working fine up until a few months ago. I didn't do anything wrong but the battery was disconnected for about a week straight while I was on vacation. Came back and reprogramed the alarm just as I had before and no remote start. It starts with the key in the ignition but for some reason it will not remote start. I have the 555l. Should I try replacing the 555l. I've overlooked my wiring and all seems to be in place. Doubled checked every wire from the 555l and the connections are solid. The tach wire is connected and I already checked the hoodpin. Any ideas/suggestions? Or should I try replacing the 555l??
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: January 04, 2005 at 6:16 PM / IP Logged  
the RSunit doesnt respond?
the RS unit crank but do not turn over?
you mentioned: it start w/ the key in teh ign. youre not clear about this.
-you can start ur car w/ the key or it can RS w/ the key in the IGN?
what exactly is ur car doin?
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Uniqueauto 
Copper - Posts: 73
Copper spacespace
Joined: January 04, 2005
Location: United States
Posted: January 04, 2005 at 6:27 PM / IP Logged  
we need to know if the rs even responds to the remote, or does it try to crank and fail, or even if the ign turns on then shuts off?
Yacht2cool 
Member - Posts: 13
Member spacespace
Joined: October 08, 2002
Location: United States
Posted: January 04, 2005 at 8:00 PM / IP Logged  
When I remote start with the key in ignition, the truck starts up just fine. When I try to remote start without the key in ignition, it cranks and fail's to turn over. Sorry about the confusion and thanks for your replies. Any suggestions??

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer