the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Relays


Post ReplyPost New Topic
< Prev Topic Next Topic >
jayyzr 
Copper - Posts: 114
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 14, 2004
Location: United States
Posted: January 09, 2005 at 1:18 PM / IP Logged  

New with the car alarm thing, Just want to know is it best to use relays w/ the wire from the ignition harness for a remote starter.. or just any basic Info for the use of relays thanks..

Taking It 1 Wire @ A Time...
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: January 09, 2005 at 1:27 PM / IP Logged  
jayyzr wrote:

Just want to know is it best to use relays w/ the wire from the ignition harness for a remote starter.

Can you re-phrase this and try to be less specificRelays -- posted image.
J Rilla
Owner/Installer
jayyzr 
Copper - Posts: 114
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 14, 2004
Location: United States
Posted: January 09, 2005 at 1:47 PM / IP Logged  

I guess just asking in general when connecting  wires from RS Should I use a relay on each wire at the ignition harnest . The starter, ignition, accessory, 2nd ignition if needed and the 12+ V or just run them straight....

I ask because I had a avital RS on my Lexus SC when I bought it and it was hooked up that way and I took it out and connected a alarm w/remote start but didn't use any relays and it works fine.. Just general question

Taking It 1 Wire @ A Time...
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 09, 2005 at 6:19 PM / IP Logged  
Unless the unit your installing has built in relays on ALL the ign. wires......YOU nEED to use a relay

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 11, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer