2000 Chrysler Sirrus Remote Door Locks

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Chrysler Sirrus Remote Door Locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

catburton22

Member - Posts: 5

Joined: January 11, 2005

Location: Canada

Posted: January 11, 2005 at 1:23 AM / IP Logged

I have a 2000 sirrus and am installing a premier asp-150a security system into it. i have everything but the remote door lock/unlock hooked up because i was curious as to where exactly i should hook this up. ive browsed around this site a bit and found some info but am unsure what type of wiring it uses (ie: single, 3 wire -/+ ect.)

can someone help me out?

thanks

Back to Top

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 11, 2005 at 7:49 AM / IP Logged

http://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/images/chry1wirecarsredirect.htm

This should be the info you are looking for......

Craig

Back to Top

catburton22

Member - Posts: 5

Joined: January 11, 2005

Location: Canada

Posted: January 11, 2005 at 10:41 AM / IP Logged

That info dosen't help much... The car already has power locks... i just need to know what wires to splice into

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: January 11, 2005 at 11:00 AM / IP Logged

CHRYSLER, CIRRUS, 2000, Power Lock

Use positive (+) trigger thru a 620 ohm resistor to lock, and a positive (+) trigger thru a 2.7K ohm resistor to unlock. Must use relays.

Power Lock WHITE/ green + rear of fuse box under dash

Be careful whose advice you buy, but be patient with those who supply it. 2000 Chrysler Sirrus Remote Door Locks -- posted image.

Back to Top

catburton22

Member - Posts: 5

Joined: January 11, 2005

Location: Canada

Posted: January 11, 2005 at 2:55 PM / IP Logged

thanks pencil... i ended up going to canadian tire and asking them... they printed off the wire list for me with all that stuff on it... :) picked up a relay for the starter interrupt as well... should be done in no time... :)

thanks

ian

Back to Top

catburton22

Member - Posts: 5

Joined: January 11, 2005

Location: Canada

Posted: January 11, 2005 at 9:43 PM / IP Logged

is it a big deal if i dont use relays... cause i was testing it to see if it would work and it did... but only if i had the 620 ohm resister on red wire...

not sure what the deal is there...

Back to Top

catburton22

Member - Posts: 5

Joined: January 11, 2005

Location: Canada

Posted: January 11, 2005 at 9:45 PM / IP Logged

i should also add that i didnt use relays

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Chrysler Sirrus Remote Door Locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.