Astro start 2503 and 94 Ranger

Hi Guys: My son brought a 94 Ford Ranger with a Astrostart 2503 installed in it. I noted that when I got the user guide for the 2503 that the unit was designed for manual transmission and carburated vehicles. The truck that it is installed in is fuel injected and automatic. It does work except the door unlock and lock is wired backwards. Can someone send me an installation guide for the Astrostart 2503 so that I may correct the wiring and check the programming? We need to extend the run time and check if this unit is installed correctly with all the safeties,ect. Tks for your help.Cool rider

i am not familiar with that unit nor do i have a manual for it. as far as the locks go you can get your dmm and test thewires at the module to see which two wires pulse when you press the lock and unlock on the remote. then simply switch them.

Tks misterjimbo I plan to do that but my son wants to extend the run time also. The pragramming information is normally in the installation guide that you normally do not get when installer installs it. We should give the customer all the information. Although that is very dangerous because the customer while make a change, miss up the unit so it doesn't work then come back for warranty. Right. Cool rider

Hi KarTuneMan Tks for the info. I am still waiting for the installation guide from Astroflex Quebec so that I may understand this units workings. Cool rider