1995 Jeep Grand Cherokee Radio

Home / the12volt's Install Bay / Car Security and Convenience / 1995 Jeep Grand Cherokee Radio (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

captin

Member - Posts: 2

Joined: January 15, 2005

Posted: January 16, 2005 at 4:24 AM / IP Logged

Hi,

On the radio I get "Wait 2hr" it was like this when I purchased the car. Does this mean I have to have the car ignition turned on for 2 hours before it will let me enter the code? I have had the car for a few days now and done quite a few journeys, but none long enough to have it running 2 hours.

Thanks.

captin

Member - Posts: 2

Joined: January 15, 2005

Posted: January 16, 2005 at 3:47 PM / IP Logged

Sussed it. You DO have to have the ignition switched on for 2 hours to reset the code. The 2 hours start when you turn the ignition on and if you turn it off the 2 hours will start next time you turn it on again.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 Jeep Grand Cherokee Radio

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.