97 Ford probe remote start / alarm

Home / the12volt's Install Bay / Car Security and Convenience / 97 Ford probe remote start / alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

BobGAGT

Member - Posts: 28

Joined: February 15, 2003

Location: United States

Posted: January 20, 2005 at 11:40 AM / IP Logged

Hey everyone,

This weekend I'm going to be putting a remote start / alarm in a 97 probe gt and I had a few questions. First of all I know that the lock / unlock uses the same wire and one needs the 4700ohm resistor.... can I get one of those from radio shack? Do I need to put a diode after the resistor?

Also, I know the factory disarm wire, and I know the remote start has a factory disarm lead, so just hook these two together or do I need a bypass module of some sort? Are the rest of the wires in this car easy to locate?

Thanks in advance

-Bob

Back to Top

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: January 20, 2005 at 11:49 AM / IP Logged

lock is positive trigger, unlock is positive trigger through a 4700ohm resistor. the wire is GREEN/ black in the driver kick panel. you dont need any diodes but you need to use relays, one for lock and one for unlock. factory alarm disarm is not needed.

Back to Top

BobGAGT

Member - Posts: 28

Joined: February 15, 2003

Location: United States

Posted: January 20, 2005 at 12:26 PM / IP Logged

Even for remote start?

Back to Top

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: January 20, 2005 at 5:51 PM / IP Logged

i dont think so. try it and see what happens. i dont even think that vehicle has a factory alarm.

Back to Top

BobGAGT

Member - Posts: 28

Joined: February 15, 2003

Location: United States

Posted: January 21, 2005 at 12:29 AM / IP Logged

Well the diagram from this site says there is a factory disarm wire... thats all I saw so I was assuming it has a stock theft system or something... I just want to take the car apart once, not 3 or 4 times trying to figure extra stuff out.

Thanks

-Bob

Back to Top

BobGAGT

Member - Posts: 28

Joined: February 15, 2003

Location: United States

Posted: January 24, 2005 at 11:27 PM / IP Logged

Alarm is installed and all is well... thanks for the help guys.

Oh lol someone already had one in there.. it was a "CHAPMAN" and it had a huge shock sensor... I was trying to figure out how it was wired and it started sparking all over the place (LOL)... all kinds of bare wires, etc... but now is all well. I installed a cheap pager alarm / remote start off ebay and it went quite well and the unit works very well... I prefer my autopage to it (for remote functionality) but overall I was impressed.

ANYWAYS, I'll be back for my next install! 8-)

-Bob

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Ford probe remote start / alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.