Is ’05 Aztek the same as '04?

Install went great- some of my notes for anyone elses install

Brown wire at ignition needs to be "on" during R/S- I added a relay as a third ignition- you don't have to do this- but you will get an aggravating "check vehicle soon" message in the driver info center if it isn't powered. Some wiring diagrams say not necessary for brown wire- some say it is.

Park lites need to be negative (-) input at BCM- some sheats say positve at brown wire at BCM- if you go positive- you get a "park lamp out" message in driver info center. 

Hok up disarm during r/s wire to allow dome lite control when unlocking, and avoid setting off factory alarm.

Ignition wires at switch are little guage- they run to relays elsewhere- no need for tach sensing- this car starts itself by pulsing the starter wire