Starter Kill Relay with 2 start wires

Home / the12volt's Install Bay / Car Security and Convenience / Starter Kill Relay with 2 start wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

achadwick23

Member - Posts: 9

Joined: January 23, 2005

Location: United States

Posted: February 12, 2005 at 5:20 PM / IP Logged

Can some one help me?? I m doin a remote start/ alarm on a 2005 scion tC....and it has 2 starter wires....how do i hook up the starter kill relay? do i only have to cut the first start wire?

slammedb5

Copper - Posts: 103

Joined: January 05, 2005

Location: United States

Posted: February 13, 2005 at 3:07 AM / IP Logged

Cut it and see if it starts.

EK Civic

security

no audio

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: February 15, 2005 at 6:25 AM / IP Logged

you can cut both or you can cut one and use 2 6v diodes in paralel to send power and isolated the second start wire.

how own your mind, control your life.

MECP certified. always use a DMM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Starter Kill Relay with 2 start wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.