03 Ram Door Locks?

Home / the12volt's Install Bay / Car Security and Convenience / 03 Ram Door Locks? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

soundmasta

Silver - Posts: 246

Joined: November 17, 2004

Location: United States

Posted: February 15, 2005 at 2:47 PM / IP Logged

i installed a crimestopper alarm/start combo on an 03 ram and im having problems with the door locks. i used a dei data bus intergration mod. 456c, and that didn't work, next i wired relays with resistors to the WHITE/ green wire with 330 ohms for unlock and 820 ohms for lock. that didn't work. then i tried the lt. GREEN/ orange wire that does fact. alarm arm/disarm with 2k to lock and 480 to unlock. the lock works but the truck will not unlock, even with double pulse. any suggestions? im about to set the truck on fire.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 15, 2005 at 6:23 PM / IP Logged

What does crimestopper tell you to do..... maybe check the lock outputs...?

Them guys have more modules than DEI.....maybe try one of theirs. Sound to me like your doin everything correctly?

Ive allways wanted to torch a perfectly good truck 03 Ram Door Locks? -- posted image.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 15, 2005 at 9:54 PM / IP Logged

Try 400 ohm with unlock, one easy way to test is to ground a piece of wire with the resistor and touch the unlock wire. Close the truck door when you are testing it.

Be careful whose advice you buy, but be patient with those who supply it. 03 Ram Door Locks? -- posted image.

soundmasta

Silver - Posts: 246

Joined: November 17, 2004

Location: United States

Posted: February 16, 2005 at 7:26 AM / IP Logged

the penis mightier? i'll take foods that end in "amburger" for 400 please.....i've ben doing that. i figure it just needs a different resistance, and i haven't tried 400 yet. i think i'm going to start with one ohm and just work my way up untill it works. i get paid by the hour, so it seems like the perfect solution.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 16, 2005 at 8:28 AM / IP Logged

Sorry that my advice to you was of the obvious. I thought I can give a simple solution to some of the do it yourselfer on this site to try. Sorry, I didn't reconize that you were a professional installer. It was an advice specifically aims at something that one can easily overlook.

As KarTuneMan said, you have done everything correctly.

Goodluck with it.

Be careful whose advice you buy, but be patient with those who supply it. 03 Ram Door Locks? -- posted image.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: February 16, 2005 at 3:41 PM / IP Logged

does the truck have factory alarm? if yes than use a CHDL3PK.

if not, I use 240 unlock and 680 lock if my unit has straight negative lock outputs. otherwise a relay ond 33, 820.

Make sure you have the right wire for lock, it will be WHITE/ DARK GREEN there are 2 WHITE/ green wires, the one with the darker stripe is the one you want.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

soundmasta

Silver - Posts: 246

Joined: November 17, 2004

Location: United States

Posted: February 17, 2005 at 1:08 PM / IP Logged

well, i figured it out. the 2k for lock worked. i ended up using a 440 ohm for unlock/disarm. works perfect. it's strange because it's usually 480 like the tech shtte says, but i guess this one was flawed or somthing. 440 was the magic number. thanks guys.

soundmasta

Silver - Posts: 246

Joined: November 17, 2004

Location: United States

Posted: February 17, 2005 at 1:08 PM / IP Logged

well, i figured it out. the 2k for lock worked. i ended up using a 440 ohm for unlock/disarm. works perfect. it's strange because it's usually 480 like the tech sheet says, but i guess this one was flawed or somthing. 440 was the magic number. thanks guys.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 Ram Door Locks?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.