door triggers in jeep

Home / the12volt's Install Bay / Car Security and Convenience / door triggers in jeep (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

derfnigel

Member - Posts: 2

Joined: February 26, 2005

Location: Canada

Posted: February 27, 2005 at 6:04 PM / IP Logged

Im installing a viper 690xv in a 2004 jeep liberty.Im having a hard time finding the door pins and if i have to do all 4 or just the front 2.I know iv got to put diodes on the pins too

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: February 27, 2005 at 6:22 PM / IP Logged

JEEP, LIBERTY, 2004, Door Trigger

The LF door is tan in the gray 26 pin plug, pin 4. The RF door is tan/red in the gray 26 pin plug, pin 5. The LR door is tan/orange in the gray 22 pin plug, pin 3. The RR door is tan / YELLOW in the gray 26 pin plug, pin 22. Use all four wires and diode isolate each.

The BCM (Body Control Module) is attached to the left of the fuse box.

the wires are at the bcm

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door triggers in jeep

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.