the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

530t vs 98 accord sedan ex


Post ReplyPost New Topic
< Prev Topic Next Topic >
accord78 
Copper - Posts: 97
Copper spacespace
Joined: February 23, 2005
Location: United States
Posted: March 05, 2005 at 5:13 PM / IP Logged  
anybody have done this before install 530t's for both front and back windows if so how hard is it to do on that 98 accord ex sedan
superman1218 
Member - Posts: 13
Member spacespace
Joined: April 17, 2003
Location: United States
Posted: March 05, 2005 at 9:46 PM / IP Logged  
It might be possible, but when you lower your front window, your rear window on that side will go down with it.  I dont even think you can use a diode to stop the feed-back of current, you might just stop all current going to that moter. Just do it right, go on ebay , they are cheap.. I hope i helped in some way, even though your question asked if its ever been done.
superman
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: March 06, 2005 at 10:27 AM / IP Logged  
??? Are you asking how hard is it to install 2 window modules in your accord? Because you need 2.
The hardest part is getting your driver's door wires because you have to go into the door for the wires and you have to run the wires through the door boot(it has plugs).
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
accord78 
Copper - Posts: 97
Copper spacespace
Joined: February 23, 2005
Location: United States
Posted: March 06, 2005 at 11:56 AM / IP Logged  
do u have to go into each door to get the wires???? help
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 06, 2005 at 2:15 PM / IP Logged  
no just go to the drivers door, it has all the wires for all doors.
you might want to skip out on this. ive work several honda/acura door boot and its not fun, especially when you have to run a lot of wires into it. if youre doin this for a customer, i wouldnt suggest it... itll give you a headache.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer