1999 Chevy Tahoe remote start

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Chevy Tahoe remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

wit77

Member - Posts: 15

Joined: November 06, 2002

Location: United States

Posted: November 06, 2002 at 2:58 PM / IP Logged

Im trying to setup my remote start and need a wire to go to my starter/ignition coil...does anyone know what this looks like and where it is. Thanks alot

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 06, 2002 at 3:01 PM / IP Logged

ECM is located on drivers side inner fender. Tach wire found in a black plug marked 'WHITE'. The target wire your looking for is WHITE in color.

If you are looking for the starter wire then it's YELLOW or PURPLE at teh igntion harness.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

wit77

Member - Posts: 15

Joined: November 06, 2002

Location: United States

Posted: November 06, 2002 at 3:09 PM / IP Logged

I have a wire that has to go to the tach wire which i guess what you're talking about but it is also asking for another to go to the ignition coil and I dont know what that looks like or where to find it....is that under the hood and if so what does it look like and where? thanks

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 06, 2002 at 3:28 PM / IP Logged

Normally you only need one wire for a tach signal. Make sure you read if it's an either/ or both wire connection.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

wit77

Member - Posts: 15

Joined: November 06, 2002

Location: United States

Posted: November 06, 2002 at 3:45 PM / IP Logged

Thanks for your help. I found the one marked WHITE for tach signal and have that done but am still having problems finding the "ignition coil" and dont have a clue what it is talking about or what it does. Thanks again

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 06, 2002 at 4:24 PM / IP Logged

What unit are you installing ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

wit77

Member - Posts: 15

Joined: November 06, 2002

Location: United States

Posted: November 06, 2002 at 4:47 PM / IP Logged

Im installing a CrimeStopper CS2011 remote starter/alarm Thanks

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 06, 2002 at 5:23 PM / IP Logged

I must be blind... I can't find reference to the ignition coil in the diagram. What color is it ? http://www.crimestopper.com/techweb/ProductDiagrams/CS2011RS.pdf

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

wit77

Member - Posts: 15

Joined: November 06, 2002

Location: United States

Posted: November 06, 2002 at 5:56 PM / IP Logged

I must be seeing things too...i just cant find what im doing wrong. When I push the start button the daytime lights come on like its trying to start and thats it. Any suggestions? I must be in the wrong wire or something. thanks

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 06, 2002 at 6:00 PM / IP Logged

Are you bypassing the passlock II security system? If you are, check the security light and see if it is operating the same as if you were to start it with the key.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.