door won't unlock

Home / the12volt's Install Bay / Car Security and Convenience / door won't unlock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

soundmasta

Silver - Posts: 246

Joined: November 17, 2004

Location: United States

Posted: March 16, 2005 at 10:13 AM / IP Logged

i installed a crimestopper alarm in an 03 dodge ram 4-door. the rear dirvers door won't lock now. it unlocks, but the door won't lock. does anyone know what the lock motor colors are? what should i do?

Back to Top

Bmnicolosi

Copper - Posts: 173

Joined: January 26, 2005

Location: Louisiana, United States

Posted: March 16, 2005 at 10:18 AM / IP Logged

it is a one wire system in that truck. you need 2 relays and resistors in order to do it properly. the wire is in the drivers kickpanel and it is a white with a green stripe if it does not have factory alarm. the resistor will depend on if it has factory alarm or not.

If you say "I already know how", don't ask me a single question.

Back to Top

cutter1122

Copper - Posts: 103

Joined: January 16, 2005

Location: Canada

Posted: March 16, 2005 at 12:34 PM / IP Logged

12volts	pnk/blk & RED / wht	+	ignition harness
Starter	yellow	+	ignition harness
Second Starter	N/A
Ignition	blue (16 awg)	+	ignition harness
Second Ignition	red or RED / wht	+	ignition harness
Third Ignition	N/A
Accessory	green & orange	+	ignition harness
Second Accessory	blue & blk/wht	+	ignition harness
Notes: These wires may not be necessary for remote start.
Keysense	lt. blue	-	ignition harness
Power Lock	WHITE/ green	-	driver kick panel
Notes: Lock requires a negative trigger thru a 820 ohm resistor. Unlock requires a negative trigger thru a 330 ohm resistor. MUST use relays. Can also use Directed 457C or 456L interface modules.
Power Unlock	same wire as power lock
Lock Motor	tan/pnk or tan/blk		driver kick panel
Unlock Motor	blue		driver kick panel
Parking Lights+	BLACK / YELLOW	+	relay under hood at pwr ctr
Parking Lights-	purple / YELLOW	-	headlight switch
Notes: Parking lights require a negative trigger thru a 330 or 1.4K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch.
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light	PURPLE / black	+	automatic day/night mirror
Door Trigger	see notes	-	see notes
Notes: The LF door trigger is tan, and the LR door is tan/orange or PURPLE / orange. These wires are in the driver kick panel. The RF door trigger is tan/red, and the RR door is tan / YELLOW. These wires are in the passenger kick panel. Use all wires and diode isolate each. See DirectFax document 1076 for wiring information.
Dome Supervision	brown	-	driver A pillar or cluster
Trunk/Hatch Pin	N/A
Hood Pin
Trunk/Hatch Release	N/A
Power Sliding Door	N/A
Factory Alarm Arm	lt. GREEN/ orange	-	driver kick panel
Notes: This will also do door locks. Arm/lock is negative trigger thru a 2K ohm resistor. Disarm/unlock is negative trigger thru a 480 ohm resistor. Single pulse will do disarm without unlocking the doors. Unlock requires a double pulse. MUST use relays. Can also use Directed 457C or 456L interface modules.
Factory Alarm Disarm	same wire as alarm arm
Disarm No Unlock	see factory alarm disarm
Tachometer	NOT GREEN/ orange	ac	ign coi, coil pack, or injector
Notes: Diesel tach wire use gray/black in the black plug at the PCM.
Wait to start	see DirectFax document 1091
Brake Wire	WHITE/ tan	+	brake pedal switch
Parking Brake	WHITE/ lt. green	-	parking brake switch
Horn Trigger	BLACK/ red	-	steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3

Immobilizer Bypass Module:	Required: Yes	Type: Sentry Key	Part #: 555C, 556U, or 555U
Notes: Only vehicles with gray keys have the immobilizer.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door won't unlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.