Perimeter sensor

Home / the12volt's Install Bay / Car Security and Convenience / Perimeter sensor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

malaga

Member - Posts: 2

Joined: March 31, 2005

Location: Romania

Posted: March 31, 2005 at 2:43 AM / IP Logged

Hello everyone,I am from Romania, I am new on this forum, I searched all the forum, dut I din't find what I am looking for.

I have a Guard alarm, with Ungo perimeter sensor on which I have one indoor and one outdoor tuners. I suppose one is responsible for outside sensibility and the other one, for the inside. I had to minimize the external one because whenever someone passed the car, it started to give pre-warning signals (3 beeps). This wouln't be such a problem, but if that someone was running past the car, it would start the alarm. Is there anything I can do to set it give only the 3 pre-warning beeps and not have it start the alarm when running past it?

And another thing... also positionned on the sensor, I have 2 very small switchers (like jumpers on the computer motherboard) which don't have anything written on, but the two of them are in OFF position. Do you hapen to know what they do?

Thanks in advance.

Back to Top

JiggaFan

Copper - Posts: 71

Joined: February 20, 2003

Location: United States

Posted: March 31, 2005 at 11:34 PM / IP Logged

could be possible that lifting one of them to an "on" position would completely disable the "full trigger" alart. in that particular situation, the prox will only chirp away and will never start the alarm. i'm sure if you're doors are opened, the alarm will go off, right? so change one of the jumpers to "on" and see if you can get the full alarm to go off at all...if not, then leave it like that.

if you don't want to lose the full alarm completely, then just keep playing with the exterior adjustment until you get it just right...sometimes those things require the smallest turn to get it "just right".

Back to Top

malaga

Member - Posts: 2

Joined: March 31, 2005

Location: Romania

Posted: April 07, 2005 at 12:27 AM / IP Logged

I have found a picture of my sensor. You can see there the two mini switches. What are them for? Perimeter sensor -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Perimeter sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.