30 amp or 40 amp realy for door locks

Home / the12volt's Install Bay / Car Security and Convenience / 30 amp or 40 amp realy for door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 08, 2005 at 7:49 PM / IP Logged

how much amp do after market locks draw. i need to use 5 actuators in a vehicle. would a 30 amp realy work or would i need a 40 amp, also would a 451M be able to handle the load.

tjdurham

Copper - Posts: 180

Joined: July 25, 2003

Location: United States

Posted: April 08, 2005 at 7:55 PM / IP Logged

yes to all

bretbowman

Copper - Posts: 156

Joined: February 17, 2005

Location: United States

Posted: April 09, 2005 at 2:49 AM / IP Logged

I agree, yes to all. ;)

I have a ten amp fuse running my lock motors and it has worked for without blowing fuse. I'd assume by that, that the draw on mine is less than ten amps. Just for reference.... obviously different lock motors draw different amps.

Good luck!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

30 amp or 40 amp realy for door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.