Matrix RSX 3.5 into '90 Nissan Truck

Home / the12volt's Install Bay / Car Security and Convenience / Matrix RSX 3.5 into '90 Nissan Truck (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hardbody916

Member - Posts: 4

Joined: April 13, 2005

Location: United States

Posted: April 13, 2005 at 3:54 AM / IP Logged

Okay, i'm going to try my first alarm install. I'm putting in a Clifford MAtrix 3.5 into a 1990 Nissan Hardbody. Also, i'm putting in some Spal power locks at the same time. HEre's my question since i already know it takes a lot of time and patience...am i going to need to buy ANY additional relays or anything of that nature, or will the equipment i'm installing be straightfoward?? Let me know, thanks!!!

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: April 13, 2005 at 5:00 AM / IP Logged

doesn't hurt to have some relays in the tool box even if you don't need them this time

Back to Top

hardbody916

Member - Posts: 4

Joined: April 13, 2005

Location: United States

Posted: April 13, 2005 at 12:43 PM / IP Logged

yeah, but i'd figure that such a high end alarm would have all necessary equipment. Does it?

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: April 13, 2005 at 9:59 PM / IP Logged

hardbody916 wrote:

yeah, but i'd figure that such a high end alarm would have all necessary equipment. Does it?

Being high-end could also be an excuse to add options out the wazoo...think of a mercedes with tons of options.

You should have a DEI 451M micro-relay pack with the RSX 3.5. This should do the job for you. However, for your custom acutators, you must add door lock/unlock relays on their own for door switches..

Back to Top

hardbody916

Member - Posts: 4

Joined: April 13, 2005

Location: United States

Posted: April 14, 2005 at 1:40 AM / IP Logged

so basically all i should need is the 451M and then 2 relays for the door locks?

Back to Top

hardbody916

Member - Posts: 4

Joined: April 13, 2005

Location: United States

Posted: April 14, 2005 at 1:40 AM / IP Logged

so basically all i should need is the 451M and then 2 relays for the door locks?

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: April 14, 2005 at 9:37 AM / IP Logged

hardbody916 wrote:

so basically all i should need is the 451M and then 2 relays for the door locks?

That is correct. Wire up your actuators first with the relays and door switches in place so you have the basic functionality of power door locks. Then install your alarm with the DEI 451M relay pack.

Some links: Mounting Ideas

Actuator wiring

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix RSX 3.5 into '90 Nissan Truck

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.