Windstar factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / Windstar factory alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: April 27, 2005 at 7:13 PM / IP Logged

I did a r/s on this 1999 ford winstar. Everything works great. The problem is the ford alarm. It has triggered on the customer twice since the r/s was installed. I looked at it today and opened the windows and locked the doors.. came back awhile later and manually unlocked the door and opened it. The alarm sounded. In remote start I did the same thing..the alarm did not sound,so I know my disarm wire is working. My question is why would it go off all of a sudden...it has never before the r/s.. I would like to know how to make it so you need to arm the system manually instead of passively.. I think that would do the trick. Any thoughts?????

hawn13

Copper - Posts: 171

Joined: April 13, 2005

Location: Hawaii, United States

Posted: April 27, 2005 at 7:55 PM / IP Logged

I am guessing you did keyless too? Is the customer locking the doors manually (with the switch in the van)then trying to unlock them will the aftermarket keyless if so this could set of the alarm. that might be the problem. just a guess?? Did the factory alarm go off when it was remote started or just when they came up to open the doors with out it remote started?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Windstar factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.