the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

autostart 4500 problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
patmar 
Copper - Posts: 69
Copper spacespace
Joined: August 09, 2002
Location: Quebec, Canada
Posted: November 15, 2002 at 7:53 PM / IP Logged  

i have a combo alarm remote starter in a civic 90 dx 3 doors. my problem is the alarm sound without any reason. change unit and shock sensor for a new. the problem always presnt . i use one diode for trunk and one for doors.(i have one input for both)  i'm try to use diode in other side but alarm not work. the led flash 4 times for false alarm indicate doors is open .

tank to help

pat

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 15, 2002 at 11:02 PM / IP Logged  
Which way do you have the band facing on all the diodes ??
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
patmar 
Copper - Posts: 69
Copper spacespace
Joined: August 09, 2002
Location: Quebec, Canada
Posted: November 17, 2002 at 2:06 PM / IP Logged  
ok jeff the band of diode facing wire in car  i'm try to reverse the side of  diode but alarm not work (led flash but  if doors or trunk open alarm stay armed and not sound)
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 17, 2002 at 10:05 PM / IP Logged  
You have (-) door trigger so the cathode band is facing the door triggers. You may have to double isolate the wires with two diodes ( use two 1 amp diodes ). Aswell you havet o grab each door separately and diode isolate each door wire not just from one door pin.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
patmar 
Copper - Posts: 69
Copper spacespace
Joined: August 09, 2002
Location: Quebec, Canada
Posted: November 22, 2002 at 7:53 AM / IP Logged  

ok jeff . but in wiring diagram the  wire for doors pin is the dome light . i'm use this wire . but the dome light when passenger door is open the light from the dome light  is more strong and the light from open driver door is very low. it is possible is my touble?

tank

pat

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 22, 2002 at 8:20 AM / IP Logged  

Doesn't really matter, as long as it's grounding you will have a signal. The problem your stating is that it falses with a door trigger notification from the alarm. Make sure that the trunk trigger is sending a (-) pulse ONLY when the lid is open. What you can also do is disconnect one of the triggers for a while until the alarm falses again. The n you will know which one it is.... the hatch or the doors.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer