Anyone know how to program a compustar?

Home / the12volt's Install Bay / Car Security and Convenience / Anyone know how to program a compustar? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

darrell77433

Member - Posts: 1

Joined: May 20, 2005

Location: United States

Posted: May 20, 2005 at 10:34 PM / IP Logged

Hello, and thanks for trying to help me out here, ive just spent 2 hours installing my alarm, and my patience is taking a lil bit of a beating :-)

I have a magicar fai-440, which I'm told is the same as a compustar alarm. I cant figure out how to program it, and I have seen other posts which say that they are a pain to program. The manual says to turn the ignition on then off, then push the valet switch to select the item to change, then wait for one beep for it to be enabled, or 2 for it to be disabled.

The problem here is, it doesnt beep at all until 10 seconds later when it beeps for 2 seconds to let me know that it is out of programming mode. I have tried calling compustar, but they say they cant help me. I also cant read korean, so magicar's web site isnt gonna do me any good :-)

Thanks for reading through that long of a post, I really appreciate your help.

Darrell

Back to Top

hawn13

Copper - Posts: 171

Joined: April 13, 2005

Location: Hawaii, United States

Posted: May 21, 2005 at 8:45 PM / IP Logged

if it has a valet switch then it isn't a compustar they don't believe in them. compustar does make the new scosche alarms.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Anyone know how to program a compustar?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.