Advantguard5 brake light wiring

Home / the12volt's Install Bay / Car Security and Convenience / Advantguard5 brake light wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

yekeyeke

Member - Posts: 3

Joined: June 03, 2005

Location: Japan

Posted: June 03, 2005 at 2:37 AM / IP Logged

Please help for Advantguard5 brake light wiring.

They are written in a manual as follows:

H2/10 BROWN / red brake light (+)12V input
This is the polarity source for the brake light output and must be 12volt constant.
H2/11 BROWN / white brake light input/output
This wire powers the brake light circuit with the 12volt circuit only on H1/10 when activated.

So I confused about H2/10 wiring.

Which of "brake output" or "constant 12V", must I conected it to?

I expect that I must connect it to brake output.But I'm not confident about it.

In other words, do I cut off brakes circuit and let a clifford circuit interrupt there?

(Please see an attached fig.)

Regards.

Advantguard5 brake light wiring -- posted image.

Back to Top

cosmoworks

Copper - Posts: 144

Joined: June 02, 2004

Location: United States

Posted: June 03, 2005 at 10:33 AM / IP Logged

No interupt. H2/10 goes to +12V constant, and H2/11 just taps into the brake light positive.

Back to Top

yekeyeke

Member - Posts: 3

Joined: June 03, 2005

Location: Japan

Posted: June 03, 2005 at 6:49 PM / IP Logged

I made a mistake about H2/11 sorry.

It's written in installation guide as follows.

H2/11 BROWN / white brake light input/output
This wire powers the brake light circuit with the 12volt circuit only on H2/10 when activated.

Thank you cosmoworks!!

Do you mean as a following figure?

Even if I have mistaken about H2/10, do you still mean a same?

Back to Top

yekeyeke

Member - Posts: 3

Joined: June 03, 2005

Location: Japan

Posted: June 05, 2005 at 3:38 AM / IP Logged

My doubt was completely settled.

Thank you.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Advantguard5 brake light wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.