logic sensor not working

Home / the12volt's Install Bay / Car Security and Convenience / logic sensor not working (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

daniel_hill

Member - Posts: 4

Joined: June 01, 2005

Posted: June 06, 2005 at 12:43 AM / IP Logged

i just got my alarm all wired in and everything except for the logic sensor works. it is an ungo ms 7000. there are two wires that i did no hook up and i dont know if it has some thing to do with it. the first one is the warn away input and the second is the ground output when armed. if anyone could help me that would be great. just to find out were those wires connected would help me alot. thanks in adavnce

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: June 06, 2005 at 2:18 AM / IP Logged

??

Back to Top

daniel_hill

Member - Posts: 4

Joined: June 01, 2005

Posted: June 06, 2005 at 7:29 PM / IP Logged

it is on a 93 civic 4 door, the logic sensor is the sensor that detects motion to trigger the alarm. thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

logic sensor not working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.