clifford concept 300 problems

Home / the12volt's Install Bay / Car Security and Convenience / clifford concept 300 problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 07, 2005 at 2:48 PM / IP Logged

quite a few problems guys hopeing u can help,

all system wires are connected, intellistart 4 dont work, no supply coming from boot pop wire, valet code dont enter,remote headlamp button unlocks and locks doors as does it work normaly with the standard lock/unlock button that is fine what kind of programing is this,

the car has been on another car i asked the person it came from but no reply yet i dont think he knows either i really need help with this one any help will be much apriciated

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 08, 2005 at 2:09 PM / IP Logged

got the valet code sorted but it dont make the chirp noises when trying to program what could be wrong,also it says in the book that the system cannot be accessed with the cliffnet unless the valet code has been entered, do you have to just enter it with the ignition on and then you can access it or do you have to go into another menu.

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 25, 2005 at 6:59 AM / IP Logged

hi got a problem with the arm/disarm chirps they dont work on the cliffnet it is showing that it is on the warn away noise works and the siren works when the system is triggerd so i know there is nothing wrong with the siren itself any help will be much apriciated.

Back to Top

minihif44

Member - Posts: 6

Joined: June 28, 2005

Location: United Kingdom

Posted: July 01, 2005 at 12:59 PM / IP Logged

hello there i think on all g4 systems u can alter the volume of the chirps in installer mode if u have not got it i can email it to u on monday

cheers

shaun

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: July 18, 2005 at 4:08 PM / IP Logged

i have tried programing the chirp to activate on cliffnet it is on loud i have tried doing it through valet switch aswell and when you are going into the selectable features anyway it should chirp but it wont i dont understand how it has just stoped working, the warning tones work but disarm and arm chirp dont any ideas, because it is one thing after another with this s****y alarm it is going to get smashed if anything elese stops working

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford concept 300 problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.