2000 Mazda ???

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Mazda ??? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

speekafreak

Member - Posts: 25

Joined: May 02, 2002

Location: United States

Posted: November 21, 2002 at 3:48 PM / IP Logged

I installed a keyless and remote start in my 2000 Mazda 626 and it works good. My only problem is since I am not using the factory keyless remote it honks the horn if the ignition isn't turned on within 30 sec. Can someone tell me how to remove or bypass the factory alarm so it won't do this?

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 21, 2002 at 3:58 PM / IP Logged

Unfortunately the only way to disarm this alarm is with the factory remote or by turning on the ignition. Now I am not 100% sure which ignition wire needs to be powered up, but you would need a relay to power up the ignition wire after or at the same time as it unlocks.

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: November 21, 2002 at 7:39 PM / IP Logged

factory disarm is light GREEN/ red in 16 pin plug on fuseblock in driver kick panel.

speekafreak

Member - Posts: 25

Joined: May 02, 2002

Location: United States

Posted: November 22, 2002 at 5:52 AM / IP Logged

Does it take pos or neg trigger? Can you just hook this wire so it is constant and it will never arm? If it needs a relay instead can someone point me towards a diagram or pin numbers? Thanks.

speekafreak

Member - Posts: 25

Joined: May 02, 2002

Location: United States

Posted: November 23, 2002 at 1:11 PM / IP Logged

anybody else?

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: November 23, 2002 at 2:23 PM / IP Logged

according to my techsoft program it says that you can disarm the factory alarm by sending a positive pulse to the blue / YELLOW key sense wire located at the steering column... hope this helps!

speekafreak

Member - Posts: 25

Joined: May 02, 2002

Location: United States

Posted: November 23, 2002 at 2:31 PM / IP Logged

I tried that and it just beeps the key buzzer. It doesn't disarm the alarm. Do you know where the alarm module is?

securinu

Silver - Posts: 772

Joined: September 15, 2002

Location: United States

Posted: November 23, 2002 at 3:42 PM / IP Logged

coming in from the driver door tag the light GREEN/ red wire with a negative signal . you can just split the unlock thru 2 diodes and tap both wires.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Mazda ???

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.