Cobra 8188

Home / the12volt's Install Bay / Car Security and Convenience / Cobra 8188 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mjhayward

Member - Posts: 1

Joined: June 10, 2005

Location: Great Britain

Posted: June 10, 2005 at 2:44 AM / IP Logged

I have just had a Cobra 8188 alarm fitted to my Vauxhall Vectra C 2003 3.2GSI, all seems to be ok except the fitter said it is not possible to wire the front indicators to flash, back ones are ok, any advise on how to do this would be very helpful.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 10, 2005 at 5:17 AM / IP Logged

I,ve just been on the cobra site and they have full instructios on how to hook up the indicators on the 04 Vectra. Its a little tricky i can mail it to you if you want. PM me your mail address. test the wires on the steering column you might be able to get them at the switch too be easier

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 10, 2005 at 5:04 PM / IP Logged

Glad to hear that it worked out for you.

I'd say that the installer was just lazy

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Cobra 8188

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.