95 galant Door lock

I'm installing a viper car alarm/keyless entry/remote starter system in a 95 galant.  I'm trying to hook up the negative triggers to the driver side door lock actuator.  do i have to use relays set-up in the actuator/reverse polarity set-up.  Any help would be very helpful as this intergated lock curcuit in the car is baffiling me.  I was hoping to use the lock switch, but it is built right into the cuircut board.Chris Miller

Alos, I was going to set in tachless and wrap a wire around a spark plug wire since itis a coiless engine, unless someone knows what wire I can tap into to set it to tach modeChris Miller

for tach just go to any odd color at the injectors. and for doorpin green / orange in driver kick panel area and is  ( - )

thanks alot for the help, but what do you mean by "odd color"Chris Miller

" ODD COLOR " means taht there are 4 common colored wires for the injectors and then 4 uncommon colors..... use any one of the 4 uncommon clored ones for the tach signal.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA