Have remote start, want an alarm

I have a remote starter installed in my car and i just installed a system worth 850$ so i want and alarm now... ll have to build a relay bypass circuit for the ignition inputwire of the remote start and the shock sensor trigger wire. These need to be done because as you initialize the remote start the alarm would see power on its ignition and be set off or the shock sensor would get tripped. These would each require a relay to interrupt each circuit when the RS is activated. I can use any name brand alarm just make sure that it has a secondchannel output to be able to use the alarm remote to activate the RS. Anyone wanna try to help me and give me some sugesstions on how to wire up those relay pins???? Thanks in advancedino :)

What about looking into an alarm and starter combination unit. It's a lots easier to accomplish than it is to figure out how to get the second unit to correspond to the first unit that you have install. Be careful whose advice you buy, but be patient with those who supply it.

Does the remote start have an input wire to activate the remtoe start ? or did you want to carry around two remote ocntrols ?Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

i wouldnt mind carying two of them dino :)