crimestoppers cs2006fm

ok hear the problem i want to work both my doors individualy off this alarm they are shaved so i want to operate the solenoids but this alarm has only one aux output what other function can i use on the alarm to open the other door.thanx for ur time

Why not have the driver door pop when disarming and have the passenger door pop when you press the trunk output. Then go into options: 10. DISARM WITH AUX. OUTPUT (TRUNK POP)

ON = System will not Disarm with Aux. (Trunk pop) operation. OFF = System will disarm with Aux. operation. Set it for "System will disarm with Aux. operation." When your alone and you disarm the vehicle your driver door will always pop, which I would assume would be ok. And if you have a passenger you press the trunk pop which will pop the passenger door and disarm the alarm which should in turn pop the driver door as well. Which I would assume is fine too because if you have a passenger...you need a driver.Steve G

im not thinkin hear wont the solinoid pop when i arm it i dont have power door locks now. so that part of the alrm is not hooked up can i hook it up so it will just pop when i disarm it. not pop when i arm it i now when u hook up a alarm it sends a signal when arm/disarm. so i just dont hook up sumthing up so no signal goes to it when arming i think i just confused everyone i need help but i got the aux thing.

Yeah, you use the disarm/unlock output to trigger the driver door pop and the AUX/trunk output to trigger the passenger door pop. The arm button would not need to be hooked up to the doors. You won't need any power locks because you have no exterior door handles. Then like I said go into programming and set it for "System will disarm with Aux. operation." That should do what you want.Steve G

hey thanks for the help i really appriciate it alot thank u

No problem, let us know when it is all complete and how everything worked out.Steve G