There Has to be something to fix this

Hey people! I got a problem that seems like sometime simple will fix. I have my door handels shaved off my car. I have the wiring done so that when I hit my #2 aux button on my alarm, it will pop open Driver's door. When the driver's door is popped, it releases the factory door pin grounding my second relay so when I hit #2 again, it pops passanger door. BUT what happens is there is no delay. It seems like a constant flow of electricty is emitted therefore when the driver's door becomes slightly open ( grouding the door pin) electricity shoots right to the passanger door. So what I have wired works, but too good. Is there something I can do so electricity doesn't instantly go to the passanger's door. Something to give a 2 second delay or something? Is this clear as mud? Any options are welcome. I would like to know if something simple can be done without getting a new alarm with 2 aux's Thanks in advanced!

DEI 528T timer module should do the job....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

What alarm? Or how about you wire the driver's door to pop when disarmed and the passenger's door to pop on aux. There is no need to add anything.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

That is an idea, but the way the alarm is, it locks when armed and unlocks when disarmed. So if the alarm ever does go off, when I disarm it, the door will pop. Alarm is this alarm