How Do you test a (-) neg 200ma from alarm

Home / the12volt's Install Bay / Car Security and Convenience / How Do you test a (-) neg 200ma from alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

joelr7309

Copper - Posts: 97

Joined: September 23, 2002

Location: United States

Posted: December 04, 2002 at 12:49 AM / IP Logged

Test to see if you are getting the - pulse ch. 2 output from your alarm.

How do you test if your getting a (-)neg 200ma output from the alarm,

Just connect to (+) pos and connect the ground from the meter to the alarm,

and just push the channel 2 button and the volt should go to 12-0 volts? How Do you test a (-) neg 200ma from alarm -- posted image.

the rookie!~

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 04, 2002 at 1:49 AM / IP Logged

YUP !!

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

joelr7309

Copper - Posts: 97

Joined: September 23, 2002

Location: United States

Posted: December 05, 2002 at 11:59 AM / IP Logged

What if you don't get a neg(-) output from the alarm, is that an option you turn off/on on the alarm?

the rookie!~

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 05, 2002 at 12:35 PM / IP Logged

There may be an option on this wire, you will need to look that up in your install manual. Usually, there is something that comes out of an AUX channel wether it is a pulsed or a latched or constant, but always something ....... unless it's a (+) AUX trigger output ??

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How Do you test a (-) neg 200ma from alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.