2000 Impala Door Lock

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Impala Door Lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lentesubigo

Member - Posts: 1

Joined: September 18, 2005

Location: United States

Posted: September 19, 2005 at 8:08 PM / IP Logged

I have read that I will have to use 2 relays or a special module to connect my Black Widow BW-853 to the power door locks.

Here are two diagrams I have been refered to:

http://www.bulldogsecurity.com/New%20Wires/New%20Wires/Wires/images/CHEVY%20IMPALA%20locks.gif

and

Nissan's Single Wire '91-'95 using 2 relays

https://www.the12volt.com/doorlocks/page2.asp#n2

Does it make a difference what keyless system I am using as to what diagram to use? Will both work? Is there anything else I need to know to install my keyless system in a base model 2000 Impala.

Thanks in advance for you help.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: September 19, 2005 at 8:55 PM / IP Logged

U may need 2 SPDT Relays to supply a stronger GROUND Pulse, but you could try your unit first.

The BCM is a little pain to get out in the open

I use:

Power Lock	ORANGE / BLACK	AT BCM ON DRIVER SIDE **
Power Unlock	SINGLE WIRE SYSTEM	OF INST PANEL

** ORANGE / BLACK Door Lock Wire Must Receive A Ground (-) Pulse Thru A 470 Ohm Resistor To Lock And A Solid Ground (-) Pulse To Unlock.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Impala Door Lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.