the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Ford F150 Keyless Entry


Post ReplyPost New Topic
< Prev Topic Next Topic >
rayraydeployed 
Member - Posts: 1
Member spacespace
Joined: September 30, 2005
Location: United States
Posted: September 30, 2005 at 4:14 PM / IP Logged  

As the title says I have a 2000 F150 XLT Super Cab.  I had keyless entry installed at a local car stereo shop.  This place has been in business for 25 years so I assume they are experts.  I had no problem with my power locks before and there is no factory installed system (doesn't go into programming mode).  When I went to the shop to get my pick-up they said that the motors were going bad.  I was thinking maybe they thought they were slow when I thought they were normal.  Anyways, I discovered that pushing lock and/or unlock (on the fob) will sometimes not work or maybe just one of the doors.  The manual buttons on the inside do the same thing.  So did they forget something or is it just a coincedence that both door lock motors decided to go bad at the same time when I got keyless entry installed?

Thanks in advance

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: September 30, 2005 at 4:38 PM / IP Logged  

Could be a co-inkydink....But I doubt it....If U are NOT sure of how it is wired, a person can "fry" the Actuator / s

If you are sure the Truck Did NOT come with Factory Keyless,...Ask the shop Manager if they used Relays or did the Keyless have Relays Built in.  Also ask how they hooked it up...should be 5 wire Reversal

Power LockPINK / YELLOWABOVE STEERING
Power UnlockPINK/L GREENCOLUMN **
** Without OEM Keyless Entry , Reversal Rest At Ground Door Locks
With OEM Keyless Entry , Negative Pulse Door Locks

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: October 02, 2005 at 12:15 AM / IP Logged  

Have had this happen a couple of times.  Most often the customer will not even know that the locks aren't working properly because you can pull the inside handle and the door will open even if it's locked.  I'm not saying the shop couldn't have screwed up some where.  I'm just saying it's possible they went. 

Cause I'm So white and nerdy...
First Class Certi-fried installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer