530T/529T exchange resistance

Home / the12volt's Install Bay / Car Security and Convenience / 530T/529T exchange resistance (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: October 05, 2005 at 10:17 PM / IP Logged

Hey guyz has anyone exchange the resistor on a 530T or 529T internally? Which resistor is it on the board? I have a vehicle with four windows up on a 95/97 suburban, an two windows do not fully roll up, because the windows get stuck a little and this causes the modules to stop.thanks in advance.

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: October 05, 2005 at 10:20 PM / IP Logged

did u adjust the dip switchs?

Where theres is a wire there's a way.

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: October 05, 2005 at 10:29 PM / IP Logged

530T yes I did but it still stops half way.

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: October 05, 2005 at 10:33 PM / IP Logged

really even on high? did u try putting it on the factory setting? But to answer ur first question.....no i have never swaped the resistors out.

Where theres is a wire there's a way.

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: October 05, 2005 at 10:38 PM / IP Logged

resistor settings on 530T changed from low/middle/high and no luck.

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: October 05, 2005 at 10:52 PM / IP Logged

there is a factory setting too.....i think it use's the factory settings....if that doesnt work....beats me.....i have had the same problem of other cars....i just had to tell customer to forget it.

Where theres is a wire there's a way.

chrias

Member - Posts: 7

Joined: May 26, 2003

Location: Canada

Posted: October 18, 2005 at 7:41 AM / IP Logged

Here's a link to the 530T modification. It worked on mine.

http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1900.pdf

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: October 20, 2005 at 10:03 PM / IP Logged

Chrias thanks, you made my day.I'll try this.thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

530T/529T exchange resistance

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.