05 equniox passlockII reset

Home / the12volt's Install Bay / Car Security and Convenience / 05 equniox passlockII reset (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigyosh

Member - Posts: 1

Joined: October 08, 2005

Location: United States

Posted: October 08, 2005 at 9:47 AM / IP Logged

We were putting a viper 771 rs on a 2005 chevy equniox everything went really well untill we tried to remote start it.

It did not start so we tested it with the key and it will not start so some how we messed up the passlock we have tried to undo the battery we have let the car sit with everything closed for 10-20 min. we have tried leting the car sit with the key in the run position with the door open, and with the door closed. Is their any other trick to reset or re-program the passlockII system? Please help My shop really fcan not afford a tow charge and a fat ass bill from the dealership. Thanks Josh

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 08, 2005 at 10:54 AM / IP Logged

restore your passlock wires back to factory.

than, turn key on for 15 minutes.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 equniox passlockII reset

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.