05 Camry, remote start

installed a remote start in an 05 Camry. In remote start only, I get an airbag light on the dash. This doent do this when started with the key. This car had no transponder and was a great car to work on.. I think i have all the wires powered..any ideas????

Are you sure you don't have the BLACK / Yellow wires reversed?

BLACK / Red = Ignition 1

BLACK / Yellow = Ignition 2

BLUE / Red = Accessory

Plus 2 Starter wires:

BLACK / WhiteBLACK / Yellow

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

As mo12v states, it's a good idea to check if the two BLACK / YELLOWs are reversed. The blue/red accessory wire is for the radio, power mirrors and so forth----I don't power it up, but it won't hurt if you do. No connection to the keysense wire is necessary, since the one you worked on doesn't have a factory alarm. Where on the dash is the airbag light? In the instrument cluster, or over in the center of the car, to the right of the clock? The light to the right of the clock is simply to tell you whether the passenger airbag is on or off-----there is a weight sensor in the seat----if small parcels are placed on the seat, the car realizes it's not a person, turns the airbag off, and turns that light on.

Thanks for all your help first of all.. I found that the selectable output from the crimestopper was nott set for the 2nd starter option.. must have been firing a module up throwing the abs light. All set now.... that was the first wires I verified with my meter was the second starter and the ignition.. I love working on these cars..alot of fun...thanks again Mo and Chris