the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

97 chev venture


Post ReplyPost New Topic
< Prev Topic Next Topic >
john_defran 
Member - Posts: 2
Member spacespace
Joined: January 11, 2005
Location: Canada
Posted: November 16, 2005 at 9:41 AM / IP Logged  

I have a 97 venture in my bay right now, im starting it as soon as a write this, i got the basic wires from the database to the left but am just wondering if someone could point me to where exactly the loc/unlock and disarm wires are. And does this van have a imobilizer system, pk3?

If you could post a wire diagram that would be great, i did a search and seems no one else has needed a 97 wire diagram yet.

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 16, 2005 at 9:52 AM / IP Logged  

Power LockL BLUE10 PIN CONNECTOR IN
Power UnlockWHITEDRIVER KICK PANEL

Negative Pulse Door Lock

1997 Didn't have Pass Lock

Check your Key Shank and see if it says PK3

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
john_defran 
Member - Posts: 2
Member spacespace
Joined: January 11, 2005
Location: Canada
Posted: November 16, 2005 at 11:51 AM / IP Logged  

Last wire, door triggers. I found the drivers trigger wire, but cannot find the other doors wires in the kick panel. Theres no tan/dk blue like stated on the diagram on this site.  The drivers trigger wire than i did find is a solid tan.

Please let me know if you can help me, thanks

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 16, 2005 at 12:10 PM / IP Logged  

Dome LightGRAY/BLACK (-)AT BODY CONTROL MODULE **

** Alternate Door Trigger Circuit: TAN (Dr), D BLUE (Ps Front And Liftgate) And ORANGE (Sliding Door) (-) At Body Control Module Below Passenger Dash. Diode Isolation Needed, Cathode (Band) Side Of Diode Faces OEM Wires.
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer