Passlock II locked out

Home / the12volt's Install Bay / Car Security and Convenience / Passlock II locked out (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chinhookmech

Member - Posts: 3

Joined: November 26, 2005

Location: United States

Posted: November 26, 2005 at 10:26 PM / IP Logged

I am working on a 2002 Pontiac Grand AM and I am installing a remote start. I was checking the voltage drop for the Passlock system( the yellow and back wires). I accidently connected on of the ends of the yellow wirer directly to the black wire. NOW CAR WONT START with KEY. I have allready checked the following: fuses, fuel pressure good, Main, IGN1, IGN2, start and grounds are all good. Vehicle is in park. Checked OBDII with reader and it was clean. Passlock voltage drop is 4.95v normal and 2.45 in crank. I tried disconnecting the battery for 15min did not work. WHAT CAN I DO PLEASE HELP!!! (I am going to check if I get spark here shortly) please email me servaas_s@yahoo.com My Gf is going to kill me if I dont have this car running again before monday.

My wife is going to kille me if I dont get this thing working

Back to Top

ponchsmart

Member - Posts: 9

Joined: February 20, 2005

Location: United States

Posted: November 26, 2005 at 10:32 PM / IP Logged

Is the security ligth, blinking or allways on?

if it is blinking, open the ignition switch, (do not crank the vehicle), and let it sit like that for 10 minutes, the ligth should be on for the entire time, when the 10 minutes has passed the ligth should turn off and you can crank the car.

hope this help........

Back to Top

chinhookmech

Member - Posts: 3

Joined: November 26, 2005

Location: United States

Posted: November 26, 2005 at 10:43 PM / IP Logged

the security light is allways on. I will leave it in RUN for 10 min, or is it in ACC mode that it resests??

My wife is going to kille me if I dont get this thing working

Back to Top

chinhookmech

Member - Posts: 3

Joined: November 26, 2005

Location: United States

Posted: November 26, 2005 at 11:01 PM / IP Logged

Its starting again! Thanks ponchsmart I let her set in ACC for 10 minutes and she fired right up.

My wife is going to kille me if I dont get this thing working

Back to Top

ponchsmart

Member - Posts: 9

Joined: February 20, 2005

Location: United States

Posted: November 26, 2005 at 11:06 PM / IP Logged

Glad i could be of some help......

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Passlock II locked out

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.