APS-686 in a 02 Sante Fe

Home / the12volt's Install Bay / Car Security and Convenience / APS-686 in a 02 Sante Fe (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

shmoove77

Member - Posts: 9

Joined: December 03, 2005

Location: United States

Posted: December 03, 2005 at 7:47 PM / IP Logged

Yellow/Black tracer wire + 12 volt alarm by pass Output

You must disconnect the ignition input of the alarm from any other wire that is presntly connected to the vehicle.......What does that mean ????

Does anyone know if the park lights are a chassis ground sysytem ??

Is there any good diagrams for this vehicle out there ?

Thnaks

Shawn

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 03, 2005 at 7:52 PM / IP Logged

That means you need to disconnect the ignition wire from your alarm and connect it to the yellow/black instead. The lights can be had either positive or negative. Negative is white at the light switch, positive is GREEN/ orange at the fuse box.

Mike M2

Tech Manager

CS Dealer Services

shmoove77

Member - Posts: 9

Joined: December 03, 2005

Location: United States

Posted: December 03, 2005 at 7:55 PM / IP Logged

Thanks....This thing has a factory alarm....Also this is my first remote start install...thought I would give it a whirl

Shawn

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 03, 2005 at 8:09 PM / IP Logged

Ok, this will be the 3rd time to try this, lets see if it works....

12volts	red and orange	+	ignition harness
Starter	blue	+	ignition harness
Second Starter	N/A
Ignition	blue	+	ignition harness
Second Ignition	pink	+	ignition harness
Third Ignition	N/A
Accessory	green	+	ignition harness
Second Accessory	N/A
Keysense	brown	+	ignition harness
Power Lock	yellow	-	driver kick, white 22 pin plug
Power Unlock	WHITE/ black	-	driver kick, white 22 pin plug
Lock Motor	gray	5wi	driver kick, white 22 pin plug
Unlock Motor	white	5wi	driver kick, white 22 pin plug
Parking Lights+	GREEN/ orange	+	fuse box, 15 pin plug
Parking Lights-	white	-	headlight switch
Hazards	green (only w/fac. alarm)	-	ETACS, 12 pin plug
Turn Signal(L)	pink	+	steering column
Turn Signal(R)	gray	+	steering column
Reverse Light	blue/black	+	fuse box, top right plug
Door Trigger	yellow	-	fuse box, 8 pin plug
Dome Supervision	use door trigger
Trunk/Hatch Pin	BLACK/ orange	-	fuse box, 15 pin plug
Hood Pin	pink	-	ETACS, 12 pin plug
Trunk/Hatch Release	N/A
Power Sliding Door	N/A
Factory Alarm Arm	factory remote only
Factory Alarm Disarm	factory remote only
Disarm No Unlock	disarms with remote start
Tachometer	WHITE/ black or blue	ac	ECM
Wait to start	N/A
Brake Wire	GREEN/ black	+	brake pedal switch

Mike M2

Tech Manager

CS Dealer Services

shmoove77

Member - Posts: 9

Joined: December 03, 2005

Location: United States

Posted: December 03, 2005 at 8:19 PM / IP Logged

One more question then I'm done....Thank you for all the help so far.

Will I have to disarm the factory alarm before I use the remote start to start it ?

Shawn

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 03, 2005 at 8:23 PM / IP Logged

Nope! It should happen on it's own.... APS-686 in a 02 Sante Fe -- posted image.

Mike M2

Tech Manager

CS Dealer Services

shmoove77

Member - Posts: 9

Joined: December 03, 2005

Location: United States

Posted: December 03, 2005 at 8:30 PM / IP Logged

So how do I find the ignition wire on the factory alarm ?

Shawn

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 03, 2005 at 8:33 PM / IP Logged

Why would you need it? It arms only with the remote, diarms only with the remote or when the ignition is turned on. You really don't need to worry about the factory alarm at all....

Mike M2

Tech Manager

CS Dealer Services

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 03, 2005 at 8:35 PM / IP Logged

Oh, i see, the bypass says......

Don't worry about it, just don't hook up the yellow/black...

Mike M2

Tech Manager

CS Dealer Services

shmoove77

Member - Posts: 9

Joined: December 03, 2005

Location: United States

Posted: December 03, 2005 at 8:35 PM / IP Logged

Ah I see...that is why I paint them and not install alarms

Shawn

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.