disengage alarm

Home / the12volt's Install Bay / Car Security and Convenience / disengage alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ctdave

Member - Posts: 1

Joined: December 11, 2005

Location: United States

Posted: December 11, 2005 at 11:12 AM / IP Logged

Hello to everyone

On very cold days my car(97 Maxima) won't turn over, when this happens my alarm start so go crazy. The remote keypad(JTI) is several years old, and is sometimes takes me 5-10 mins to turn it off. This morning it happened and i could not get it to turn off, i had to disconnect the battery in order to stop it. Once i reconnect the battery the problem will still be there. My question is, is there a way whether it be inside the keypad? under the hood? or whatever, to disengage the alarm. I will eventually either take it out completely, or look to have it fixed. The place that installed the alarm has closed. Please any advice is appreciated. Thanks.

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: December 11, 2005 at 1:08 PM / IP Logged

depending on the alarm configeration you can becuase it is an older alarm pull the harness to the brain of the alarm and it will get you going. but will have to remove that faulty alrm completly.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

disengage alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.